news

Categories of news

Product Category

Contact us

Address: 405 Qinfeng South Road, Kunshan, Suzhou


Contact: Mr. Wan Qiliang


Telephone: 86-0512-57779769


Hand machine: 13776359698


E-mail: WQL_0816@163.com


Website: www.ksxinheshun.com



Talking about how to maintain the gluing part and folding part of the automatic folder gluer

Your current location: Index >> News >> Industry News

Talking about how to maintain the gluing part and folding part of the automatic folder gluer

Release date:2020-09-23 00:00 Source: http://www.ksxinheshun.com Click:

    Talking about how to maintain the gluing part and folding part of the folder gluer


    How to maintain the gluing part and folding part of the folder gluer:


    1. The width of the adhesive opening of the carton should match the width of the rubber wheel. In the process of automatic box gluing, the width of the gluing mouth of the carton should meet the requirements of the gluing machine. Too wide or narrow will affect the quality of the gluing box. Too narrow will cause glue overflow; if it is too wide, the pre-folding will be affected to a certain extent. In addition, the concentricity of the gluing wheel must ensure accurate packaging and anti-counterfeiting, and the knurling of the edges must be free from wear to ensure uniform gluing.


    2. Before gluing, make sure that the conveying route of the carton sticking edge is parallel to the conveying belt.


    3. The gap between the upper and lower rubber wheels and the amount of glue applied should be suitable for food packaging to ensure that the glue layer is thin and even.


    4. The folding part is equipped with a folding transmission. If necessary, the folding transmission should be adjusted to ensure the correct alignment of the sticky mouth.


    5. The adhesive mouth that has been coated with adhesive must not touch other parts of the machine, otherwise the glue will accumulate in this part and rub against the parts that should not be glued.


    6. The gluing position should be appropriate. Too far away from the crease line will make the box unsightly. If it is too close, glue binding may be applied to the position that should not be glued, resulting in difficulty in box formation.


    

Related tags: 全自动糊盒机