Address: 405 Qinfeng South Road, Kunshan, Suzhou
Contact: Mr. Wan Qiliang
Telephone: 86-0512-57779769
Hand machine: 13776359698
E-mail: WQL_0816@163.com
Website: www.ksxinheshun.com
Precautions for the screw selection of the automatic box gluer. When selecting the screw, the shape of the container, the speed of pushing, the end-to-end distance and the aforementioned related issues should be considered. During processing and manufacturing, the screw and the container should be in consistent contact. This contact surface appears to be in surface contact, but it is actually multi-point contact. After a certain period of time, the spiral wears and the shape changes, causing the container to jump and break. Therefore, materials with high resistance must be selected. The contact part of the screw and the container should be under the container, and the container should not be dumped as a principle. For deformed containers, there are often more than two containers moving at the entrance of the spiral. At the front end of the spiral, many containers are arranged side by side, which increases the pressure of the spiral, and increases the damage of the container and the wear of the spiral.